Industrial automation and control

Industrial automation| Industrial Control Systems | Electronic Control panels

Industrial Drives| Industrial Electronics | Power Electronics

Industrial automation and control, Industrial Electronics System Solution

Argus Systems(AESPL) has built competencies in the Industrial Electronics domain acquiring in-depth knowledge and expertise, creating intellectual property, re-usable platforms, and solutions. We have integrated hardware, software, and system design services to provide our customers with valuable solutions in Industrial control systems and Industrial Automation. Argus Systems believes in "First time Right solution" and with an experienced Product Engineering team, we can be your complete electronic product design and development partner.

BLDC Motor Controller

BLDC Motor controller Unit gets DC to input from a solar array and controls a brushless DC ( BLDC ) motor coupled with a multistage pump to optimally use available energy and provides a maximum discharge for various conditions of current limit supporting high pump shutoff head.

  • Rated dc input voltage 150 Vdc to 250 Vdc
  • Rated power 2500 W ( to be used with 3000 Wp solar panel)
  • maximum V/f ratio 1.5 + 5%
  • Efficiency min. 92%
  • BLDC motor rating 220Volts, 2500 Watts, 3000 RPM
BLDC Motor Controller

Hybrid Wireless Power Transfer (HWPT) solutions

Inductively coupled Hybrid wireless power system & technology for High Power, short-range wireless power transfer applications.

  • Controls the amount of power transfer using SMART frequency modulation of electromagnetic waves,
  • Loosely coupled system: Resonance & higher coupling factor to increase power transfer capability and efficiency
  • Dual functionality in the transmitter (inductive heating mode + Wireless power transfer to receiver module ).
  • Transmitter is Installed Under the appliances countertop while Receiver is Installed in the Appliances.

Industrial Safety System

  • Command Input Unit
  • Command Output Unit
  • Command conversion and transmission module
  • Command conversion and reception module
  • Signal Conversion and transmission module
  • Signal Conversion and reception module
  • Coupling module
  • Analog signal Input module
  • Analog signal output module
  • A discrete signal Input module
  • A discrete signal output module
  • Diagnostic Module
Industrial Safety System

Industrial Controller Cards for Metallurgical Equipment

  • Pump Controller
  • Servo Feed Controller
  • Ramp controller Card
  • Input & Output Card
  • Relay Control Card
  • Self Test Card
Industrial Controller Cards for Metallurgical Equipment

Chromatography-Mass Spectrometer

  • Controller Card
  • Processor Module
  • Input/Output Card
  • Display Card
Chromatography-Mass Spectrometer

Tilt Detector Card for Bulk Loading System

  • Tilt Detector card continuously monitors the Tilt of a loading arm of the bulk loading system.
  • Activates an alert when the device is tilted to pre-configured Tilt Levels
  • Programmable Tilt lever alert
  • LED Indication
  • Operates with 110-220V AC inputs
Tilt Detector Card for Bulk Loading System

Water Purification and Dispensation Solution

  • OEM Electronic cards for water vending machine with integrated RO function.
  • Integrated six stage water Purification and Dispensation Solution enables implementation of a fully automated system.
  • Modular architecture of Water Purification and Dispensation Solution having controller card, communication card and User Interface cards
  • 4G/LTE cloud connectivity for dispensation system for its operation and maintenance
  • RFID card & coin-based dispensation system
  • Periodic In-built water quality testing function
  • solenoid valve control
  • supports UV lamp & Ozonater
  • Flow sensors for dispensation taps supporting up-to 6 dispensing taps
  • TDS & PH sensor water quality sensors
  • Pressor Sensor for RO Reject & RO feed
  • Pump control for Booster Pump, Feed pump, HP Pump
Water Purification and Dispensation Solution

Welding Access Control & Data Logger

  • Welding equipment access control with Operator Fingerprint
  • Fingerprint sensor to enrol and identify the Operator while doing welding Job work
  • Monitors Voltage and Current during Welding Process
  • Local Display for Date,Time, Welder ID, welder Name and Supervisor
  • Process parameters data are logged and sent to MQTT server using Wi-Fi,4G LTE.
  • Local data logger storage in SD card
Welding Access Control & Data Logger

Emergency shutdown Valve (ESDV) Control Unit

Electronics Controller for emergency shutdown ( ESD ) Valve detects abnormal Pressure conditions on a production process and initiate a shutdown of valve if any of the reading shows the operation is no longer within the pre-set safety margins of pressure.

  • Pressure [High Pressure & Low-Pressure sensing from 60 to 20,000 psi].
  • System Battery Level sensors.
  • Emergency shutdown command from SCADA/RTU system.
  • The Pressure gauges indicate the actual reading and set points.
  • Indicator lamps indicate the status of pressor sensors and alarms which helps the operator in instantly knowing the conditions of the process.
  • A green LED shows that the system is operating without problems.
  • System Normally operates with open ESD valve and closure of ESD valve indicates that an alarm is present.
ESDV control unit

Serial Data Converters ( RS232, RS422, RS485)

Serial Data Converters are small modules that convert single-ended RS-232 signals into differential RS-422 or RS-485 signals. Signal conversion is completely bidirectional - outgoing RS-232 signals are converted to RS-422/RS-485 differential levels and incoming RS-422/RS-485 differential signals are converted into single-ended RS-232 signals.

Serial Data Converter has a DB-9 female connector on one end that mates to the DB-9 male connector found on the rear of most PCs and other serial devices. Besides its use with PCs, the Converters can be used with any 9-pin RS-232 device whose pinout matches that of a PC's COM port. Once equipped with the Converter, the PC or RS-232 device can communicate with other RS-422 or RS-485 devices.

  • Convert single-ended RS-232 signals to RS-485 or RS-422 differential signals. Bidirectional data transfer with increased noise rejection.
  • Extends RS-232 transmission distance to 1.2 Km. Overcomes RS-232's 50-foot cable limit.
  • Adds multi-drop capability to an RS-232 signal. Drives up to 50 loads.
  • Meets FCC Class A and European CE requirements. Should not interfere with other devices.
Data Converters
Industrial automation and control, Industrial Electronics System Solution

Contact Argus Industrial Electronics, Power Electronics team to discuss your industrial control and Automation Requirements.

Argus Systems (AESPL) is a global Electronic System Design and manufacturing ( ESDM ) company with Its Operations in India, USA, UK, Australia offering Industrial Electronics System Solution, Power Electronics solutions, Industrial Control Systems, Electronic Control panels,Industrial Drives, Industrial automation such as BLDC Motor Controller, Industrial Safety System, Industrial Control Card, Tilt Detector Card, Water Vending Machine, Welding Access Controller, ESD Valve controller.