EMI EMC testing, EMI EMC Consulting

EMI EMC Simulation, EMI EMC analysis

EMI & EMC Simulation, Analysis, Testing , Consulting, Certification

Argus is a Leading Electronic product Regulatory and Environmental Compliance Testing service provider of Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) engineering and compliance services offering a wide range of EMI EMC testing services to take customer products from concept to compliance ready deployment.

Our Electronic systems Engineering and consulting services Vertical provides support to design, plan, execute, inspect and verify EMI compliant electronic systems and sub-systems. we help customers to meet International EMI EMC standard compliance for their products by providing suitable solutions within a short time span as per as per FCC, IEC, CISPR, MIL STD and JSS55555.


Electronic Product V&V

EMI EMC Test Consulting Services

  • EMI EMC Consulting.Support and guidelines for selecting the appropriate filters for various applications.
  • EMC Control Planning.
  • EMI/EMC Product design review.
  • compliance risk assessments.
  • Trouble-shooting.
  • Regression testing.
  • Design mitigation.
  • EMC Performance Requirements Definition.
  • Flow Down Requirements.
  • Gap Analysis.
  • Risk Mitigation Plans.
  • EMI Test Plans and Procedures Development.
  • Board Level and System-level EMI & EMC simulation analysis.
  • Radiated Emissions Analysis.
  • Near Filed, Far Filed Emissions Analysis.
  • validation as per Compliance template of FCC, CISPR.
PCB Test Fixtures

EMI EMC Testing, Consulting, Certification

  • EMI tests CE 102, RE 101 and RE 102 as per MIL STD 461 F.
  • EMC tests CS 101, CS 114, CS 116, RS 101 and RS 103 as per MIL STD 461 F.
  • Conducted & Radiated Emission –CISPR11.
  • Electrostatic Discharge (ESD) - Contact Discharge /Air Discharge as per IEC 61000–4–2.
  • Electrical Fast Transient as per IEC 61000–4–4.
  • Surge as per IEC 61000–4–5.
  • Voltage Dips/ Interruptions as per IEC 61000–4–11.
  • PFMF (Power frequency magnetic field simulator) as per IEC 61000-4-8.
  • Damped oscillatory magnetic field as per IEC 61000-4-10.
  • Damped oscillatory wave test as per IEC 61000-4-18.
  • High voltage withstand test.
  • Impulse Test.
  • Insulation Resistance test.
PCB Test Fixtures

EMI EMC compliance standards

  • All electronic products which are intended for commercial, residential, industrial or military use must pass EMC (Electromagnetic compatibility) and electromagnetic interference (EMI) standards tests. They must perform their intended function in the electromagnetic environment and also must not degrade the performance of other devices.
  • These standards are country specific and are governed by local organizations. The EMI testing on electronic equipment for the United States is handled by the Federal Communications Commission (FCC) and is commonly referred as Part 15 testing.
  • The EMI testing for Canada is presented in the Industry Canada ICES-003 standard. In Japan the EMI testing standard is outlined by VCCI.
  • Majority of worldwide standards are derived from Comite International Special des Perturbations Radio electriques (CISPR) standards or International Electrotechnical Commission (IEC) EMC/EMI/ESD standards.
PCB Test Fixtures

Electronic Systems EMI EMC Simulation & analysis

  • EMI EMC Analysis and EMI EMC simulation at Product Design phase tests are often performed late in the product development cycle, generally at the system level using expensive anechoic chamber. This approach leads to lengthy development cycle and turns out to be very expensive if violations are discovered at this stage.
  • It is recommended to opt for design analysis services if your product is time or mission critical. Many optimizations can be done at PCB design phase and layout can be modified with minimal cost and effort.Using design, analysis and verification techniques early in design cycle is recommended as it helps in eliminating many layout iterations.
  • Analysis of radiated emission, far and near field emission , EMC emission can be done. This analyses provide insights that helps in successful regulation compliance testing and thus avoid costly hardware re-spins and reduce time-to-market.
EMI EMC Simulation, EMI EMC Analysis, EMI EMC Testing

Contact AESPL team to discuss your Electronic Products Compliance Testing requirements as per FCC, IEC, CISPR, MIL STD, JSS55555.


Argus is a Leading Electronic Products EMI EMC Analysis, EMI EMC Simulation, EMI EMC Test consulting and EMI EMC Test Certification service provider offering a wide range of testing services such as EMI EMC Test, EMI Test, EMC Test, Conducted Emission Test, Radiated Emission Test, Conducted Immunity Test, Radiated Immunity Test, Electro Static Discharge (ESD) Test, Electrical Fast Transient Test, Surge Immunity, Voltage Dips Test, Voltage Interruptions Test, High voltage withstand test, Impulse Test, Power frequency magnetic field ( PFMF) Test, Damped oscillatory magnetic field Test, Damped oscillatory wave test, Insulation Resistance test, Thermal Cycling Test, Vibration Test, Altitude Test, Toppling Test, Bump Test ,Drop test as per FCC, IEC, CISPR, MIL STD and JSS55555 supporting to Its Global Clients in India, USA, UK, Germany, France, and Australia.